SKUM MODEL CFM-2 SLABSTOCK FOAMING MACHINE FOR CONTINUOUS
PRODUCTION OF FLEXIBLE POLYURETHANE FOAM BY CONVENTIONAL AND LOW PRESSURE SYSTEM.
- Foaming width adjustable from 140 to 200cms.
- Recirculation through special gear pumps of the following chemical streams:
Polyol; T.D.I.; Water; Silicone; Amine and S.O., all outputs controlled by
electronic A.C. drives and pneumatic three way valves at the mixer.
- Methylene Chloride through air pressure via a flow meter.
- Two separate tanks with a common pump and A.C. drive for soluble colours.
- 20Mt. long MS profile powder coated slat conveyor in an enclosed tunnel
of 2Mt. height.
- Side and bottom paper take-off system at tunnel end.
- Two numbers strong exhaust fans for gas extraction from the tunnel.
- Additional slat conveyor of 5Mt. length between bottom paper take-off and
Block Cutter.
The above machine can be converted into a Flat Top Block production machine
with the addition of Fall Plates and Trough system at an additional cost. The
machine will then be similar to SKUM Model FT-II.
Chemical Storage Tanks in various capacities suiting individual requirements
are available together with respective drum to tank filling system.
Roller Conveyors and Slat Conveyors as well as Block Turning system for
conveyance of blocks to curing area in suitable length and as per individual
requirements are available on request.
All sorts of foam cutting and processing machinery, can be supplied by us,
from our manufacturing program.